Other Products
Other Products
Duty Standby
When high pressure gas supply is critical and downtime is not an option, ensure constant supply with a Duty Standby System.
About
Secomak Gas Boosters are installed at many different locations where it is critical that gas supply is constant, including hotels, hospitals and schools.
Features
- Eliminate Downtime
- Auto-Changeover on Fault Detection
- Soft-start Function
- Reduce Motor and Bearing Wear
- Duplex System
A single Gas Booster may be able to reach the desired pressure, however routine maintenance will still require that the booster pump is powered down periodically whilst a belt or bearing assembly is replaced.
If supply of boosted gas is critical to your application, then the Duty Standby System is the solution of choice.
The Duty Standby System eliminates downtime. Consisting of two (Duplex) Secomak Gas Boosters, these alternate automatically every 7 days. This allows even wear and tear on the bearings and drives on both units across their lifespan. When maintenance is required, one booster will operate whilst the other is powered down, maintaining a constant, reliable supply.
The Duty Standby kit also includes a separate wall-mounted control panel with 7-day switchover timer, allowing control of both Gas Boosters, as well as the status of both boosters from a single location. Also included are flexibles, anti-vibration mounts, flanges, non-return valves and connection leads.
Secomak Gas Boosters are built to exceed British Standard BS 8487:2007, which recommends that drive belts are changed every year and Bearing Assemblies every five years.
Duty & Standby Gas Booster FAQs
-
What is a duty & standby gas booster setup?
Two gas boosters are installed in a run and standby arrangement on the same line. Changing over every 7 days automatically whilst also providing the security of a backup booster should one of them fail or require maintenance.
-
What are the advantages of a duty & standby gas booster package.
When the increased is pressure is vital, the duty & standby system provides uninterrupted gas pressure. It all provides reduce wear and allowing preventative maintenance to take place.
-
When should I install a duty standby system?
When high pressure gas supply is critical and downtime is not an option.